No items found.

Construction Input Prices Flat in October 2026 but Up 11.5% From a Year Ago

Article details
Published:
November 14, 2026
Updated:
Read length:
7
 mins

Construction input prices were unchanged in October 2026 but stood 11.5% above a year earlier, Associated Builders and Contractors said on November 13, 2026, as steel mill products rose 32.9%.

The flat month came from falling oil and lumber prices, according to ABC. Three other measures built on the same federal data show the same pattern: a pause in the monthly numbers, but annual increases that still run well ahead of overall inflation.

This is the October follow-up to our post on the September 2026 producer price index and what it meant for construction and debt costs.

By the Numbers: Construction Input Prices in October 2026

  • 6.5%: 12-month rise in the producer price index (PPI) for final demand, after a 0.3% monthly gain (BLS).
  • 11.5%: annual rise in overall and nonresidential construction input prices, per ABC (ABC).
  • 13.3%: annual rise in the PPI for inputs to new nonresidential construction, the most in more than four years (AGC).
  • 10.4%: annual rise in the price index for inputs to new residential construction (NAHB).
  • 32.9%: annual rise in steel mill product prices (AGC; ENR).
  • 8.1 months: ABC's Construction Backlog Indicator for October, down 0.6 months from September (ABC).

What the October PPI Report Showed

The PPI tracks the prices that U.S. producers receive for goods and services. The October 2026 report came out on November 13, 2026, from the Bureau of Labor Statistics (BLS). Final demand prices rose 0.3% in October after a 1.4% gain in September.

Over 12 months, final demand prices rose 6.5%. That was the largest annual jump since November 2022, ABC News reported. Both the monthly and annual readings came in slightly below economists' forecasts, according to ABC News and Haver Analytics.

Energy prices slipped 0.1% after a 10.0% surge in September, while food rose 1.3% (Haver Analytics). Prices excluding food, energy and trade services rose 0.5% for the month and 4.9% over the year (BLS).

Separately, ABC News reported that consumer prices rose 0.4% in October.

Four Construction Input Price Index Measures, Explained

Several groups turn the same federal price data into construction cost gauges. Each one weighs different materials and services, so the results differ, and here is what each measure tracks.

ABC (11.5%): Associated Builders and Contractors (ABC) is a trade group for commercial contractors. Its analysis blends BLS prices for the materials that go into construction, and it found overall and nonresidential input prices both up 11.5% from a year earlier (ABC). Nonresidential inputs rose 0.2% in October.

AGC (13.3%): The Associated General Contractors of America (AGC) follows a BLS series called the producer price index for inputs to new nonresidential construction. That index covers both goods and services, such as freight. It rose 13.3% from October 2025 to October 2026 (AGC).

NAHB (10.4%): The National Association of Home Builders (NAHB) follows the BLS price index for inputs to new residential construction. About 60% of it is goods and the rest is services such as distribution and freight. It rose 0.3% in October and 10.4% over the year (NAHB; HousingWire).

BLS final demand (6.5%): The BLS final demand index is the broad headline measure, not a construction gauge. It is the benchmark that the three trade group numbers are compared against (BLS).

Steel, Copper and Aluminum Lead Construction Input Costs

Metals did the most damage, as steel mill product prices rose 2.7% in October and 32.9% over 12 months (ENR; Bisnow). AGC put annual gains at 23.9% for copper and brass mill shapes and 23.3% for aluminum mill shapes (AGC).

Steel also shows up inside other products: precast concrete, which has steel set inside it, rose 9.9% from a year earlier (AGC). Contractors also face longer lead times for structural steel beams and mineral wool fire insulation, AGC said.

Energy pulled the other way in October, as crude petroleum fell 10.3% and unprocessed energy materials fell 7.7%, while natural gas rose 3.7% (ABC). Over the year, though, diesel was still up 115.2% and truck freight was up 24.6% (AGC).

Residential Inputs: Plywood and Services Keep Rising

On the housing side, building materials rose 0.5% in October and 5.8% over the year (NAHB). Softwood veneer and plywood climbed 3.6% for the month and 24.5% from a year earlier. Particleboard and fiberboard rose 13.9% over the year.

Services are the stickier part of the index, as service inputs rose 0.7% in October and 11.3% over the year, NAHB said. Trade services, which are the margins earned by wholesalers and dealers, were up 13.2%, and transportation and warehousing were up 24.6%.

Morabito Investment Group Analysis: How Far Construction Costs Outrun Inflation

We compared each construction measure with the 6.5% headline PPI. The gap shows how much faster building costs are rising than prices across the wider economy.

  • AGC's nonresidential inputs index (13.3%) is running 6.8 percentage points above headline PPI.
  • ABC's overall input measure (11.5%) is 5.0 points above it, and NAHB's residential index (10.4%) is 3.9 points above it.
  • The simple average of the three trade group measures is 11.7%, about 1.8 times the headline rate.
  • Steel mill products (32.9%) are rising about 5.1 times as fast as final demand prices.

These figures come from a Morabito Investment Group analysis of ABC, AGC, NAHB and BLS data. Each gap is the trade group's 12-month change minus the 6.5% final demand change.

Backlogs Shrink Outside Data Centers

Contractor workloads are thinning, as ABC's Construction Backlog Indicator, which estimates months of work under contract, fell to 8.1 months in October (ABC). That was 0.3 months below a year earlier.

Data centers are the exception: contractors with data center work saw backlog rise from 11.3 months to 11.5 months, ABC said. The 88% of contractors without such work saw backlog fall from 8.3 months to 7.6 months, a gap of 3.9 months between the two groups.

Soft demand also limits how much contractors can pass along. AGC said rising costs and soft demand for most project types are making it hard to raise prices to owners (AGC). Macrina Wilkins, AGC's director of market insights, told ENR that the gap suggests contractors are absorbing some of the increases.

What Construction Input Prices Mean for Development Budgets

For investors, input prices feed straight into replacement cost, the price of building a comparable property today. When replacement cost rises faster than rents, fewer new projects pencil out. That tends to slow new supply and can support values of existing buildings over time.

Steel frame projects carry the most exposure, because warehouses, distribution centers and many industrial developments rely on structural steel, which is up 32.9% in a year. Longer steel lead times can also stretch schedules and raise interest carry on construction loans.

These gains add to the longer-run cost trend covered in our post on the JLL Global Construction Cost Index 2026. Slowing starts in some sectors, such as the lowest retail construction starts since 2016, fit the same pattern.

What to Watch Next

Watch whether metals prices cool or keep climbing, since they drive most of the nonresidential gap. Also watch steel lead times and whether backlogs outside data centers keep falling. The November PPI report will show whether October's pause in construction input prices holds.

Frequently Asked Questions

What are construction input costs?

Construction input costs are the prices builders pay for materials, energy and services used to put up a building. ABC measures them with BLS producer price data, and they were 11.5% higher in October 2026 than a year earlier (ABC). AGC and NAHB track related indexes for nonresidential and residential work.

What are ABC construction input prices?

ABC construction input prices are the trade group's monthly analysis of BLS PPI data for construction materials. In October 2026, overall prices were unchanged for the month and nonresidential prices rose 0.2% (ABC). Both were up 11.5% over the year.

What did the PPI report for October 2026 show?

The PPI for final demand rose 0.3% in October 2026 and 6.5% over 12 months (BLS). The annual gain was the largest since November 2022, ABC News reported. Energy prices fell 0.1% and food prices rose 1.3% (Haver Analytics).

Key Takeaways

  • Construction input prices were flat in October 2026 but 11.5% higher than a year earlier, according to ABC.
  • AGC's nonresidential inputs index rose 13.3%, running 6.8 points above the 6.5% headline PPI, per a Morabito Investment Group analysis.
  • Steel mill products rose 32.9% in a year, about 5.1 times the pace of final demand prices.

Bottom Line

October brought a pause, not a reversal, as falling oil and lumber prices held construction input prices flat for the month. Steel, copper, aluminum and freight costs keep annual construction inflation near double the headline rate, which keeps pressure on development budgets.

Image credit: Photo by Roman Serdyuk on Unsplash.

Sources

Disclaimer: This article is for general information and education only. It is not investment, financial, legal, tax or accounting advice, and it is not an offer or solicitation to buy or sell any security or property. Morabito Investment Group does not guarantee that the information is complete, accurate or current. Figures, forecasts and opinions from third parties belong to their sources. All investments carry risk, including loss of principal, and past results do not guarantee future results. Do your own research and consult a licensed professional before making any investment, financing or other decision. You use this information at your own risk.

Read more articles